CMLA C Series - 1,500 lbs

CMLA-C Series Industrial Linear Actuators

VOLTAGE: 115 or 230 VAC
SCREW TYPE: Ball screw or trapezoidal screw
STANDARD STROKE: 3.9 to 23.6 in (100 to 600 mm)
TEMPERATURE RANGE: -4ºF to 150ºF (-20ºC to 65ºC)
ENVIRONMENTAL RATING: IP66S protection standard

Free Application Analysis

Catalogs

Product Sheet

Browse All Documents

Need Assistance?

Not sure if this is the right product for your application, or need a custom solution? Contact us today for help from an expert.

Features and Benefits

FEATURES and BENEFITS:
Fully rated at 1500 lbs (6700 N) to handle dynamic loads both in compression and tension
Lifting speeds up to 1.4 in/sec (36 mm/sec) at rated load
Standard stroke lengths: 3.9 in (100 mm), 5.9 in (150 mm), 11.8 in (300 mm), 17.7 in (450 mm), 23.6 in (600 mm), 29.5 in (750 mm)
Safety clutch aids in the prevention of damage due to accidental overload conditions
OPTIONS:
Both ball and trapezoidal screw models available
Motor Voltages: 115Vac or 230Vac single phase
Electric brake (standard on ball screw models)
Position feedback potentiometer
Adjustable limit switches

Specifications

CMLA C Series 1500 lb Product Specifications
Capacitor Model	Motor	Max. Dynamic Load	Max. Static Load	Screw	Gear	Motor Power	Amperage	Lifting Speed	Duty Cycle	Capacitor Rating
#	Type	(lbs) N	(lbs) N	Type	Ratio	Volts	Amps	(in/s) mm/s	(in/hr) m/hr	mdf
192002122	AC	(1500) 6700	(2250) 10,008	Trapezoid	17.2	115	8	(0.74) 18.8	(500) 12.7	90
192002121	AC	(1500) 6700		Trapezoid	17.2	230	4	(0.74) 18.8	(500) 12.7	25
192002122	AC	(1500) 6700		Ball	14.0	115	8.3	(1.45) 36.8	(900) 22.9	90
192002121	AC	(1500) 6700		Ball	14.0	230	4.4	(1.45) 36.8	(900) 22.9	25
192002122	AC	(750)§ 3336		Ball	6.9	115	8.3	(2.9) 73.7	(1800) 45.8	90
192002121	AC	(750)§ 3336		Ball	6.9	230	4.4	(2.9) 73.7	(1800) 45.8	25
§Double Speed - Lower ratio reduces rated load to 750 lbs. Notes: 1. The correct capacitor mfd should be used for each model or the cylinder will not perform as rated. 2. Order Hard Start Kit 192036494 for applications where high starting torque is required (low temperature, high starting load)

Documents

Brochures & Catalogs

[Catalogs] Linear Actuator Design Guide Catalog [Brochure] Duff-Norton Capabilities Brochure S1

Product & Data Sheets

[Product Sheet] CMLA-C Product Sheet [Product Sheet] CMLA-C Specs and Part Numbers

Drawings & Diagrams

[Dimension Input Drawing] CMLA-C Dimensional Drawing

Product Diagrams

CMLA C Series 1500 lb Dimensions

CMLA C Series - 1,500 lbs