Skip to main content
How to Buy

PHOENIX Telescopic lifting column

PHOENIX Lifting Columns combine screw jacks and guiding in one economical system. The compact design facilitates an extensive possible field of applications and are used multi-purposely in the mechanical engineering, the aerospace as well as the pharmaceutical industry.

Documents

O&M Manual
Product Sheet
Browse All Documents

Need Assistance?

Not sure if this is the right product for your application, or need a custom solution? Contact us today for help from an expert.

Features and Benefits

  • Modular Construction
    In general modular construction can speed up project completion. The ability to adjust equipment quickly and easily with lifting columns enhances efficiency.
  • Lifting Speeds
    Up to 100 mm/s
  • High Compression and Tensile Forces 5 to 25 kN
    Suitable for low-speed, high-load applications. Trapezoidal screws are well-suited for applications involving heavy loads and relatively low speeds.
  • Enclosed and Low-Maintenance Design
    Enclosed columns offer better protection against dust, debris, and moisture, increasing reliability and performance, especially in demanding environments.
  • Admissible Off-Center Load Pick Up
    Are suitable for situations where loads cannot always be perfectly centered under the lifting mechanism, such as with medical equipment, industrial workstations, or height-adjustable desks where components may be heavier on one side.
  • Elimination of External Brakes
    Self-locking mechanism at single-start trapezoidal screw in standstill
  • Single- and Multi-Stage Design
    Good for limited height adjustments this design is ideal for applications like basic height-adjustable desks or workstations where a wide range of motion isn't required.
  • Short Safety Nut at Single-Stage Design with Trapezoidal Screw
    Reduced Risk of Buckling: In systems utilizing screw-nut mechanisms (like those with trapezoidal screws), the screw is subjected to downward forces. this design minimizes the risk of the screw buckling.
  • Comprehensive Accessories Available

Documents

Manuals & Supplements

[O&M Manual] O&M-manual-PHOENIX-IndexC-EN [O&M Manual] [O&M Manual]

Product & Data Sheets

[Product Sheet] [Product Sheet] PHOENIX-Questionnaire-EN

Related Products

Image ELA

ELA Electromechanical Linear Actuator

Load: From 0.55 kN to 13 kN Lifting Speed: Up to 84 mm/s

ALS Image Basic construction

ALS/R Electromechanical screw ram

Load: From 12.5 kN to 100 kN Lifting Speed: Up to 10 m/min

HLA Image

HLA High-performance linear actuator

Load: From 12.5 kN to 100 kN Lifting Speed: Up to 10 m/min

192079366-Pfaff-MERKUR-M0N-II-100-T14x4 Image

MERKUR Standard screw jack

Lift Capacity: 2.5 to 500 kN Input Speed: up to 1500 min-1

192079212-Pfaff-SHE0.5N-II-150-0-Tr18x6 Image

SHE Standard Screw Jack

Lift Capacity: 5 to 2000 kN Input Speed: Up to 1500 min-1

192079438-Pfaff-HSE36.1N-II-200-T24x5 Image

HSE High-performance screw jack

Lift Capacity: 5 to 1000 kN Input Speeds: Up to 3000 min-1

Image SHG Type 1

SHG Screw Jack, quick-lifting

Lift Capacity: 15 to 90 kN Input Speed: Up to 3000 min-1

SHE-S- Image Type1 INOX

SHE-S Stainless Screw Jack

Lift Capacity: 30 to 200 kN Input Speed: Up to 1500 min-1

SSP Image Type1 stainless steel

SSP Stainless Screw Jack, with swivel brackets

Lift Capacity: 50 to 250 kN Input Speed: Up to 1500 min-1

Bevel Gear Box Type K Image

Bevel Gear Box-K

Sizes: K5.13 to KV60.13 Output Torque: Up to 700 Nm

Image Bevel gear box Type KA-KV

Bevel gear box KA

Sizes: KA 1 to KA 35 Output Torque: Up to 8500 Nm

Image Bevel gear box Type KA-KV

Bevel gear box KV

Sizes: KV 90 to KV 550 Output Torque: Up to 8500 Nm

Flexible coupling R

Dampens vibrations and shocks, compensates for axial, radial and angular misalignments.

Connecting Shaft GX

Highly flexible Connecting Shaft GX connects individual drive elements to form a complete lifting system with a central drive

Connecting shaft G

Connect individual drive elements to form complete lifting systems with a central drive.

Connecting Shaft GZ

High Speed. Connect individual drive elements to form complete lifting systems with a central drive.

Connecting Shaft ZR

Used to link individual drive-system elements to a centrally driven lifting system as a whole.