Camlok® CZ Heavy Duty Vertical Plate Clamps

FEATURES and BENEFITS:

• The jaw is opened and closed with the locking lever.
• The safety lock spring loads the cam jaw, preventing the clamp from opening even when there is no load on the jaw.
• This clamp can also be used for transporting steel constructions and profiles.
• They can also be used for transporting steel constructions and profiles.
• It is recommended to use a pair of plate clamps in conjunction with a spreader beam for large sized sheets and long materials which have a tendency to sag.
• The body of this clamp is welded construction.
• Can be used to lift a plate from the horizontal to vertical position and vice versa through 180º.
• Clamp jaws and pads are manufactured from high-tensile steel.
• Fitted with a hold open and lock closed lever. To initiate the self actuating force, a spring is incorporated into the clamp to give an initial bite on the material. If the plate should start to slip during lifting, the cam shape of the jaw turns with the material and increases the gripping force.
• The cam handle is ergonomically designed with a flat surface to allow for ease of operation while wearing protective gloves.
• The cam handle connects to the cam via a robust hexagon drive.
• Unlike others, these plate clamps are designed with a sloping slot, which increases the grip on the load when the clamp is in the horizontal position.
• These plate clamps are service-friendly, making it easy to exchange parts, which are readily available. Clamp repairs must be done by a trained person.
• Design factor 4:1.
• Product group: I2.
  

INFO:

• The plate surface of the material being clamped must have a hardness level below HRC 30/Brinell 300.