Skip to main content
Find a contact

Tigrip® TBL/TBL Plus Plate Clamps

Capacity: 500 - 3000 kg
The TBL Plate Clamp is primarily used for transporting single steel plates in the vertical position, as well as lifting and turning through 180°.

Need Assistance?

Not sure if this is the right product for your application, or need a custom solution? Contact us today for help from an expert.

Features & Benefits

FEATURES and BENEFITS:

  • The TBL Plate Clamp can also be used for transporting steel constructions and profiles.
  • It is recommended to use a pair of plate clamps in conjunction with a spreader beam for large sized sheets and long materials which have a tendency to sag.
  • The jaw can be opened and closed with the locking lever (except for the TBL 0.5 t which uses a positive springloaded cam).
  • The safety lock overrides the spring-loaded cam, preventing the clamp from opening even when there is no load.
  • This plate clamp is service-friendly, making it easy to exchange parts, which are available individually or in kits.
  • Clamp repair is available by the factory, or can be done by certified and experienced staff.
  • The TBL Plate Clamp 0.5 is equipped with a safety lock (positive spring-loaded cam), but comes without locking lever.

 

INFO:

  • The surface hardness of the material must not exceed HRC 30/Brinell 300.
  • The min. load is 10% of the nominal WLL, except for model TBL 1,5 plus, the min. load here is 100 kg.

Documents

Product & Data Sheets

[Datasheets] Scheda Tecnica del Morsetto per Piastra Tigrip TBL/TBL Plus [Datasheets] Yale Tigrip TBL and TBL Plus - Datasheet German [Datasheets] Tigrip TBL/TBL Plus Plate Clamp Datasheet