Skip to main content
Find a contact

HSE High-performance screw jack

The HSE - High Performance Worm Gear Screw Jacks has been developed specifically for dynamic use at medium and high lifting speeds and an increased duty cycle. The housing made of spheroidal graphite iron with the cast-on cooling fins is designed in such a way that high heat dissipation to the surrounding area is ensured.

Documents

O&M Manual
Browse All Documents

Need Assistance?

Not sure if this is the right product for your application, or need a custom solution? Contact us today for help from an expert.

Features & Benefits

  • Eight (8) Sizes Available
  • Lifting Capacities
    From 5 to 1000 kN
  • Input Speeds
    Up to 3000 min-1
  • Self-Locking Trapezoidal Screw
  • Separate Lubrication Circuits
    Tr screw with grease-lubrication and worm gears with oil lubrication
  • Worm Gear
    Pairs in two ratio steps (normal "N" and slow "L")
  • Worm-Drive
    Shaft case-hardened and ground
  • Patented Gearing Construction
    With different heat zones for medium and high lifting speeds
  • Possible usage according to directive 2014/34/EU (ATEX)

Documents

Brochures & Catalogues

[Brochure] Linear Motion - Booklet (DE) [Brochure] Linear Motion - Booklet (EN)

Manuals & Supplements

[O&M Manual] O&M-manual-SHE-HSE-IndexH-DE [O&M Manual] O&M-manual-SHE-HSE-IndexE-EN [O&M Manual] O&M-manuel-SHE-HSE-IndexB-FR

Product & Data Sheets

[Product Sheet] ATEX 2014/34/EU Fragebogen HubanlagenandHebezeuge-DE [Product Sheet] ATEX 2014/34/EU Questionnaire Drive elements and Lifting units-EN [Product Sheet] Spindelhubelemente-Fragebogen-DE [Product Sheet] Screw Jacks-Questionnaire-EN [Product Sheet] Pfaff-HSE-Catalogpages-EN22 [Product Sheet] Pfaff-HSE-Katalogseiten-DE22 [Product Sheet] Pfaff-HSE-Catalogpages-FR [Datasheets] Pfaff HSE ficha técnica española

Related Products

192079366-Pfaff-MERKUR-M0N-II-100-T14x4 Image

MERKUR Standard screw jack

Lift Capacity: 2.5 to 500 kN Input Speed: up to 1500 min-1

192079212-Pfaff-SHE0.5N-II-150-0-Tr18x6 Image

SHE Standard Screw Jack

Lift Capacity: 5 to 2000 kN Input Speed: Up to 1500 min-1

Image SHG Type 1

SHG Screw Jack, quick-lifting

Lift Capacity: 15 to 90 kN Input Speed: Up to 3000 min-1

SHE-S- Image Type1 INOX

SHE-S Stainless Screw Jack

Lift Capacity: 30 to 200 kN Input Speed: Up to 1500 min-1

SSP Image Type1 stainless steel

SSP Stainless Screw Jack, with swivel brackets

Lift Capacity: 50 to 250 kN Input Speed: Up to 1500 min-1

Flexible coupling R

Dampens vibrations and shocks, compensates for axial, radial and angular misalignments.

Flexible protection boot FB

Protecting the screw jacks from dirt and external influences.

Connecting shaft G

Connect individual drive elements to form complete lifting systems with a central drive.

Connecting shaft GX

Medium Speed. Connect individual drive elements to form complete lifting systems with a central drive.

Connecting shaft ZR

Used to link individual drive-system elements to a centrally driven lifting system as a whole.

Connecting Shaft GZ

High Speed. Connect individual drive elements to form complete lifting systems with a central drive.

Image Flange bearing FLB

Flange bearing FLB

For radial bearing arrangements of the screw head.

Hand Wheel HW

For emergency operation or manual adjustment of worm gear screw jacks.

Pillow Block PBL

Providing support and stability to rotating shafts.

Image ELA

ELA Electromechanical Linear Actuator

Load: From 0.55 kN to 13 kN Lifting Speed: Up to 84 mm/s

ALS Image Basic construction

ALS/R Electromechanical screw ram

Load: From 12.5 kN to 100 kN Lifting Speed: Up to 10 m/min

HLA Image

HLA High-performance linear actuator

Load: From 12.5 kN to 100 kN Lifting Speed: Up to 10 m/min

PHOENIX Image

PHOENIX Telescopic lifting column

Lifting Speed: Up to 100 mm/s Tensile Forces: 5 to 25 kN